| Current Sale ($100 OFF!!!) | BUY BACK GUARANTEE | WE SHIP INTERNATIONAL! | MILITARY DISCOUNTS! |
| Turbo-Kits.com Subaru DYNO Tuning |
Top |
|
Want to the most power out of your Subaru? Want to find out how much power you have? Turbo-Kits.com has the perfect solution for you. We offer DYNO Tuning at competitive prices!
| Option: |
Price: |
| Basic Dyno Run |
$65.00 |
| Wideband Rental |
$35.00 |
| OpenECU Dyno Tuning* |
$399.00 |
| Additional OpenECU MAP (Same Day Only) |
$150.00 |
| ProTune Dyno Tuning* |
$399.00 |
| Additional Cobb MAP (Same Day Only) |
$150.00 |
* If we DYNO Tune your vehicle you will need some form of engine management. Or we can provide you with a management solution for an additional cost. AccessPort is required for ProTune.
|
DYNO Tuning | Turbo Kits | Turbo Upgrades | Intercooler & Piping Upgrades | Blow-Off Valves & Wastgates
Exhausts & Downpipes | Engine Upgrades | Engine Management | STI Performance Packages
| Full Race 1.5 Scroll Turbo Kit for 02-07 Subaru WRX & STi |
Top |
|
|
|
|
Full-Race's 1.5 scroll header/up pipe kit for Stage2+ Subarus is engineered and dyno tested to produce the fastest spool, quickest response and most hp/tq gains for a stock location header. The 1.5 scroll system consists of the twinscroll lower manifold and stock location 1.5 scroll up-pipe. Designed to optimize performance for a stock location singlescroll turbo, the 1.5 scroll up pipe uses a twin-runner configuration with the final 2->1 merge collector in close proximity to the turbine. The 1.5 scroll combines twinscroll performance characterstics with the convenience, easy installation and OE appearance of the singlescroll stock location turbos. Any stock or upgraded-stock style turbocharger and aftermarket downpipe will fit, allowing Stage2 subarus to retain all current mods. For best results, Full-Race recommends using the ATP GT series turbochargers. Compatible for all RHD and LHD subaru chassis.
|
| Perrin Turbo Kit for 04+ Subaru STi |
Top |
|
Brand: Perrin
Desc: STi 400+ WHP Kit
Type: Complete Solution
Status: Ready to Ship
Price: $7104.99 $6995.00
 Buy Now
|
Perrin 400HP Kit Includes:
- Garrett GT3076R Ball Bearing Turbo
- Perrin Equal Length Header
- Perrin Rotate Mount Stainless Up-pipe
- Tial 44mm Wastegate
- 3" Stainless Downpipe
- Stainless Wastegate Dump Tube
- Perrin Rotate Mount Intake w/ Filter
- Perrin FMIC (Signature or Stealth)
- Perrin Blow-Thru Boost Tube
- Perrin Signature Series BOV
- Cobb AccessPort w/ Full Tune
- Agency Power 816cc Injector Service
- Perrin High Flow Fuel Rail Kit
- EBCS Boost Solenoid
- All Couplers & Clamps for Install
- All Lines, Hoses & Fittings for Install
Perrin now assembles all the pieces together, so flanges, wastegate, downpipe, clocking of turbo, oil restrictors, coolant hose are all installed and aligned. The customer/shop simply has to bolt the uppipe to the header, connect oil and coolant hoses, bolt on a downpipe and fire up the car.
* Boost Pipe Only Available in Red, would need to be custom coated in order to match the Stealth FMIC kit.
|
For Engines: 2.5L (EJ25)
Boost: 18+
HP Gain: 200+
Direct Bolt-On: Yes
Warranty: 1 Year Manufacturer
Turbo Options:
- GT3076R .63AR
- GT3076R .82AR
- GT3582R .63AR (+$195)
- GT3582R .82AR (+$195)
AP Ti Cat Back Exhaust: $850.00
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
|
Notes:
- The kit will make 350-440WHP (with room to grow) depending on the fuel, turbo, elevation, dyno being used.
- To complete this kit, you need a 3” exhaust, and gauges.
|
| Perrin Rotated Mount Turbo Kit for 02-07 Subaru WRX & STi |
Top |
|
Brand: Perrin
Desc: 02-07 WRX/STi
Type: Rotated Mount
Status: Ready to Ship
Price: See Below
Buy Now
|
WRX/STi Rotated Mount Turbo Kit:
- Garrett GT Series Ball Bearing Turbo
- Stainless Steel Uppipe
- Stainless Steel Downpipe
- Oil & Water Lines
- Tial 44mm Wastegate
- Rotate Mount Col Air Intake System
- All Necessary Hardware & Bolts
- All Necessary Lines & Gaskets
* 02-05 EJ20 2.0L WRX owners will need to purchase an oil feed line.
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: Custom
Direct Bolt-On: Yes, Professional Install Suggested
Warranty: 1 Year
Perrin Front Mount Upgrade: $1195
AP Ti Cat Back Exhaust: $850.00
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| Price: |
Turbo: |
Max. Airflow: |
Spool RPM 2.0: |
Spool RPM 2.5: |
Max. HP.: |
| $3175.00 |
GT3071R |
46lb/min |
4200 RPM |
3500 RPM |
400whp |
| $3195.00 |
GT3076R |
52lb/min |
4800 RPM |
4000 RPM |
450whp |
| $3275.00 |
GT3582R |
60lb/min |
5500 RPM |
4700 RPM |
550whp 2.5L Only |
| $3895.00 |
GT4088R |
69lb/min |
6000 RPM |
5200 RPM |
600whp+ 2.5L Only |
Notes on the Perrin Rotated Mount Turbo Kits:
- The Perrin turbo kit either requires a Perrin front-mount intercooler with blow-through MAF tube, or some form of engine management that eliminates the MAF sensor. This kit makes no provisions for the stock MAF sensor.
- Engine managment, fuel system upgrades, and supporting modifcations are required with this kit.
- Professional installation is strongly recommended; this is not a task for beginners. We strongly suggest a shop familiar with Subaru performance.
- Tuning will be required with these kits.
- We strongly recommend considering engine internal upgrades for those looking to exceed 400whp on 2.5L cars (300whp on 2.0 WRXs).
- This kit is designed for the Perrin front-mount intercooler ($1195) and blow-through MAF tube ($195).
- Anything over a .63 GT3071R on a 2.0L will have lots of lag; the EJ20 will require internal modifications for proper use of any of the bigger turbos.
- We recommend internal engine modifications for the GT3582R and above on the STi to maximize potential.
|
| Agency Power Rotated Mount Turbo Kit for 02-07 Subaru WRX & STi |
Top |
|
Brand: Agency Power
Desc: 02-07 WRX/STi
Type: GT35R Uprade
Status: Ready to Ship
Price: $3060.00
Buy Now
|
WRX/STi Rotated Mount Turbo Kit:
- Garrett GT35R Ball Bearing Turbo
- 3” T304 Stainless TIG Welded Down-Pipe
- 2 Ľ” T304 TIG Welded Up-Pipe
- T304 TIG Welded Waste-Gate Dump Pipe
- 3” T304 TIG Welded Intake w/ MAF Mount
- All Necessary Steel Braded Teflon Lines
- All Necessary Rubber Hoses Needed
- Tial 38mm Waste-Gate
- K&N Reusable Conical Air Filter
- Stamped Bracket for Turbo Intake Pipe
- All Necessary Silicone Couplers
- Intercooler Adapter Pipe
- All Clamps, Gaskets & Hardware
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: Custom
Direct Bolt-On: Yes, Professional Install Suggested
Warranty: 1 Year
Perrin Front Mount Upgrade: $1195
AP Ti Cat Back Exhaust: $850.00
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
|
The Agency Power GT35R turbo kit is designed to make over 500 wheel horsepower on race gas and over 400 wheel horsepower on pump gas as tested on the STI. The WRX will produce less horsepower on the stock motor. All numbers vary depending on car modifications, tuning, and environment. This turbo is custom designed to spool up at around 4000rpm's to give the best horsepower response throughout the powerband. The turbo is capable of running 30psi and greater of boost, however we recommend many modifications to ensure the safety of the motor.
We recommend having the following parts: Front Mount Intercooler, ECU, Fuel Pump, Injectors, Fuel Rails, Catback Exhaust. Other recommended parts would be to upgrade your clutch, flywheel, shifter, radiator, and other related parts.
|
DYNO Tuning | Turbo Kits | Turbo Upgrades | Intercooler & Piping Upgrades | Blow-Off Valves & Wastgates
Exhausts & Downpipes | Engine Upgrades | Engine Management | STI Performance Packages
| Forced Performance 68HTA Turbo for 02-07 Subaru WRX & STi |
Top |
|
Brand: FP
Desc: 02-07 WRX/STi
Type: 68HTA Turbo
Status: Ready to ship
Price: $1299.00
Buy Now
|
Everyone has seen or heard about Evo3 16g turbos and TD05H 18g turbos for the Subaru 2.0 and 2.5 engines, our newest turbo is the FP 68HTA™Turbocharger for the Subaru STi/WRX unit which out flows both the E316g and 18g wheels and allows for higher PR operation without increased compressor outlet temperatures like the existing 16g and 18g wheels. Mass flow is increased to a whopping 47lb/min which is several lb/min greater than either the E316g or the 18g wheels are capable of. Rapid spool and large torque numbers are guaranteed by the TD05H turbine section.
These units are constructed from Genuine MHI 16g turbochargers which are reconfigured to 68HTA specs by Forced Performance.
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: Custom
Direct Bolt-On: Yes
(Professional Install Suggested)
Warranty: 1 Year
Ported Turbine Housing $95.00
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| ATP Garrett GT Turbo Upgrade for 02-07 Subaru WRX & STi |
Top |
|
Brand: ATP Turbo
Desc: 02-07 WRX/STi
Type: Garrett GT
Status: Ready to Ship
Price: $1675.00 & Up
Buy Now
*Fits Legacy GT w/ FMIC
|
WRX/STi Turbo GT Upgrades:
Each GT drop-in turbo package consists of a Garrett factory assembled and high speed balanced dual ball bearing CHRA which is then assembled into a set of CNC machine ported housings that have been optimized in every aspect for maximum flow and efficiency.
All accompanying oil and coolant supply components included in each kit have been designed to properly and seamlessly bridge the Garrett GT turbo to the EJ engine so that the fit is as OE as possible.
Just bolt the turbo on, add fueling and a good tune and prepare for a blast of acceleration. Garrett GT turbos offer more then just "peak HP" numbers. These GT turbos off more torque area under the curve and more "accessible" power then any other turbos series out there.
GT28RS: $1675.00 - The GT28RS is a great match on the 2.0L aiming for 350 HP.
GT2871R: $1695.00 - The GT2871R is a great match on the 2.0L aiming for 400 HP.
GT3071R: $1845.00 - The GT3071R is a great match on the 2.0L or 2.5L aiming for 450 HP.
GT3076R: $1845.00 - The GT3076R is a great match on the 2.0L or 2.5L aiming for 500 HP.
GT35R: $1945.00 - The GT35R is a great match on the 2.5L aiming for 600+ HP.
* supporting mods and proper tuning required to maximize HP from these upgrades
|
|
| Mitsubishi 16G Turbo Upgrade for 02-07 Subaru WRX & STi |
Top |
|
Brand: Mitsubishi
Desc: 02-07 WRX/STi
Type: 16g 7cm2
Status: Ready to Ship
Price: $879.00
Buy Now
*Fits Legacy GT w/ FMIC
|
WRX/STi Turbo 16G Upgrade:
New MHI TD05H 16G turbo for Subabru WRX. With 7cm2 turbine housing. This high-powered upgrade is good for 340 HP and flows 505 cfm! Get more boost for your buck, and the protection to match as standard 1yr warranty.
*Factory Bolt On
*Subaru Housing
*Supports 340 HP
*505 CFM
*Direct Replacement
Water Line Kit - $125 $69*
*needed for bolt in use
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: Custom
HP Gain: Custom
Turbo Efficiency: 340HP
Direct Bolt-On: Yes
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| Mitsubishi Big 16G Turbo Upgrade for 02-07 Subaru WRX & STi |
Top |
|
Brand: Mitsubishi
Desc: 02-07 WRX/STi
Type: Big 16G 7cm2
Status: Ready to Ship
Price: $925.00
Buy Now
*Fits Legacy GT w/ FMIC
|
WRX/STi Turbo 16G Upgrade:
New MHI Big 16G turbo for Subabru WRX. With 7cm2 turbine housing. This high-powered upgrade is good for 380 HP and flows 550 cfm! Get more boost for your buck, and the protection to match as standard 1yr warranty.
*Factory Bolt on
*Subaru Housing
*Supports 380 HP
*550 CFM
*Direct Replacement
Water Line Kit - $125 $69*
*needed for bolt in use
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: Custom
HP Gain: Custom
Turbo Efficiency: 380HP
Direct Bolt-On: Yes
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| Mitsubishi 18G Turbo Upgrade for 02-07 Subaru WRX & STi |
Top |
|
Brand: Mitsubishi
Desc: 02-07 WRX/STi
Type: 18G TD05H 7cm2
Status: Ready to Ship
Price: $975.00
Buy Now
*Fits Legacy GT w/ FMIC
|
WRX/STi Turbo 16G Upgrade:
New MHI TD05H 18G turbo for Subabru WRX. With 7cm2 turbine housing. This high-powered upgrade is good for 400 HP to wheels and flows 600 cfm! Get more boost for your buck, and the protection to match with a standard 1yr warranty.
*Factory Bolt on
*Subaru Housing
*Supports 400 WHP
*600 CFM
*Direct Replacement
We have seen this turbo go 12's in the quarter with proper supporting mods and tuning.
Water Line Kit - $125 $69*
*needed for bolt in use
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: Custom
HP Gain: Custom
Turbo Efficiency: 400HP
Direct Bolt-On: Yes
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| TD05H 18G 7cm2 Turbo for 02-07 Subaru WRX & STi |
Top |
|
Desc: 02-07 WRX/STi
Type: TD05H-18G
Status: Ready to ship
Price: $825.00
Buy Now
|
This is one bad ass turbo. This high-powered upgrade is good for 350HP+ to wheels. Get more boost for your buck, and the protection to match with a standard 1yr warranty.
The 7cm2 nozzle area turbine housing includes an internal wastegate port and standard wastegate actuator calibrated at 9 PSI. This turbo has an upgraded actuator 10 PSI to 19 PSI.
Water Line Kit - $125 $69*
*needed for bolt in use
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: Custom
HP Gain: Custom
Turbo Efficiency: 350HP+
Direct Bolt-On: Yes
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| Mitsubishi / MHI TD05H-20G Turbo for 02-07 Subaru WRX & STi |
Top |
|
Brand: Mitsubishi/MHI
Desc: 02-07 WRX/STi
Type: TD05H-20G
Status: Ready to ship
Price: $1175.00
Buy Now
|
The 650CFM Mitsubishi 20G compressor wheel is installed in a true Mitsubishi TD05H compressor housing and is paired with a 7cm2 nozzle area turbine housing. This high-powered upgrade is good for 430 HP to wheels.
The 7cm2 nozzle area turbine housing includes an internal wastegate port and standard wastegate actuator calibrated at 9 PSI. Optional upgrade actuators are available in incremental pressures from 10 PSI to 19 PSI.
Water Line Kit - $125 $69*
*needed for bolt in use
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: 9 PSI
HP Gain: Custom
Turbo Efficiency: 430HP
Direct Bolt-On: Yes
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| TD06SL 20G 8cm2 Turbo for 02-07 Subaru WRX & STi |
Top |
|
Desc: 02-07 WRX/STi
Type: TD06SL-20G
Status: Ready to ship
Price: $875.00
Buy Now
|
This is one bad ass turbo. This high-powered upgrade is good for 400HP to wheels. Get more boost for your buck, and the protection to match with a standard 1yr warranty.
The 8cm2 nozzle area turbine housing includes an internal wastegate port and standard wastegate actuator calibrated at 9 PSI. this turbo has an upgraded actuator 10 PSI to 19 PSI.
Water Line Kit - $125 $69*
*needed for bolt in use
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: Custom
HP Gain: Custom
Turbo Efficiency: 400HP+
Direct Bolt-On: Yes
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| Mitsubishi / MHI TD06-20G Turbo for 02-07 Subaru WRX & STi |
Top |
|
Brand: Mitsubishi/MHI
Desc: 02-07 WRX/STi
Type: TD06H-20G
Status: Ready to ship
Price: $1395.00
Buy Now
|
The 650CFM Mitsubishi 20G compressor wheel is installed with a true Mitsubishi TD06 turbine wheel and is paired with a 7cm2 nozzle area turbine housing. This high-powered upgrade is good for 430 HP to wheels.
The 7cm2 nozzle area turbine housing includes an internal wastegate port and standard wastegate actuator calibrated at 9 PSI. Optional upgrade actuators are available in incremental pressures from 10 PSI to 19 PSI.
Water Line Kit - $125 $69*
*needed for bolt in use
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: 9 PSI
HP Gain: Custom
Turbo Efficiency: 430HP
Direct Bolt-On: Yes
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| TD06H GT35 8cm2 Turbo for 02-07 Subaru WRX & STi |
Top |
|
Desc: 02-07 WRX/STi
Type: TD06H-GT35
Status: Ready to ship
Price: $975.00
Buy Now
|
This is one bad ass turbo. This high-powered upgrade is good for 500 HP to wheels. Get more boost for your buck, and the protection to match with a standard 1yr warranty.
The 8cm2 nozzle area turbine housing includes an internal wastegate port and standard wastegate actuator calibrated at 9 PSI. this turbo has an upgraded actuator 10 PSI to 19 PSI.
Water Line Kit - $125 $69*
*needed for bolt in use
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: Custom
HP Gain: Custom
Turbo Efficiency: 500HP+
Direct Bolt-On: Yes
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| AMR T60R Turbo Upgrade for 02-07 Subaru WRX & STi |
Top |
|
Brand: AMR
Desc: 02-07 WRX/STi
Type: CXR500-SUB
Status: Ready to ship
Price: $1499.00
Buy Now
|
The T60R was designed for those with power in mind. Its HUGE 60lb compressor wheel, HUGE machined compressor housing inlet, fully ported exhaust housing and fully ported compressor housing, gives the T60R to ability to move 850-870cfm! This turbocharger has been proven to achieve full boost around 3500-3800rpm (depending on supporting modifications), giving the vehicle a smooth but hard pulling power band. The AMR T60R can deliver 450whp-500whp at 27-29psi with the right support, doubling your factory HP
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: Custom
HP Gain: Custom
Tubro Efficiency:
450-500WHP (93 Octane)
500+WHP (C16)
Direct Bolt-On: Yes
19-24psi Wastegate Actuator: $200.00
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| AMR CXR500 Turbo Upgrade for 02-07 Subaru WXR & STi |
Top |
|
Brand: AMR
Desc: 02-07 WRX/STi
Type: CXR500-SUB
Status: Ready to ship
Price: $1499.00
Buy Now
|
AMR's CXR500 Bolt-On Turbo is an awesome turbo. The CXR500 comes with a ported, 8cm exhaust housing and a ported, custom-cast compressor housing that that is designed to fit in the engine bay better than any other turbo of this size (no grinding or busting out a BFH to make something fit). The AMR CXR500 is perfectly compatible with the OEM TMIC too! AMR backs their 350-430whp capable CXR500 with a 1-year warranty!
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: Custom
HP Gain: Custom
Turbo Efficiency:
350-380WHP (93 Octane)
380-430WHP (C16)
Direct Bolt-On: Yes
19-24psi Wastegate Actuator: $200.00
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
|
|
Brand: AMR
Desc: Wastegate Actuator
Type: 19-24psi
Status: Ready to ship
Price: $200.00
Buy Now
|
Just when you think it couldn't get any better, we can include the optional 19-24psi Custom Built Actuator for an additional $200.00. This actuator is for those running heavy boost. This wastegate combined with the CXR500 makes boost taper a thing of the past. AMR has tested the CXR500 with this actuator holding boost straight to redline.
|
For Engines: 2.0L (EJ20), 2.5L (EJ25)
Boost: Custom
HP Gain: Custom
Direct Bolt-On: Yes
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
DYNO Tuning | Turbo Kits | Turbo Upgrades | Intercooler & Piping Upgrades | Blow-Off Valves & Wastgates
Exhausts & Downpipes | Engine Upgrades | Engine Management | STI Performance Packages
| Perrin Front Mount Intercooler (FMIC) for 02-07 Subaru WRX & STi |
Top |
|
Brand: Perrin
Desc: 02-07 WRX & STi
Type: FMIC
Status: Ready to ship
Price: $1336.49
Buy Now
|
NOW AVAILABLE IN EITHER BLACK OR SILVER!
Enter the PERRIN™ Front Mount Intercooler upgrades. With gargantuan cores, cast endtanks, high velocity tubing and proper mounting supports, there simply isn’t a better choice for your car, period. These intercoolers will support more than 1000 HP and due to our stringent quality control process have less than 1/4 psi drop across the core at 20 psi., improving throttle response and putting the boost where it belongs in the the combustion chamber!
Perrin 02-07 WRX & STi Front Mount Intercoolers Include:
- Intercooler Core
- Support Beam
- Silicone Couplers
- Red, Silver or Black Texture Proder Coat Aluminum Tubing
- T-Bolt PERRIN Clamps
- Silicone Expansion Tank
- Mounting Hardware
- Instructions & Warranty
* NOTES:
- Requires purchase of Perrin Intercooler Piping
- You will not be able to retain your foglights with this intercooler
- Trimming of some of the plastic in the front bumper is required
- Will not work with a stock airbox; an aftermarket short ram intake will be required
- Moving a hard fuel line is required, this is not something for an amature mechanic
|
|
DYNO Tuning | Turbo Kits | Turbo Upgrades | Intercooler & Piping Upgrades | Blow-Off Valves & Wastgates
Exhausts & Downpipes | Engine Upgrades | Engine Management | STI Performance Packages
| Catback Exhaust Titanium Muffler & Tip for 02-07 Subaru WRX & STi |
Top |
|
Brand: HKS
Desc: WRX/STi
Type: Exhaust
Part #: 31701-BF003
Status: Ready to ship
Price: $933.75
Buy Now
|
For extreme horsepower applications, the HKS Racing Muffler system, Constructed of high-luster polished SUS304 stainless steel piping and a 170mm Titanium muffler assembly, the Racing Muffler is the lightest system (40% lighter than the race inspired Hi-Power Exhaust system) and the highest flowing exhaust system HKS offers. The muffler utilizes a slip-on/latch design that mates polished stainless steel piping and a lightweight titanium Muffler assembly. For OFF ROAD USE ONLY!
|
|
| GReddy Uppipe for 02-07 Subaru WRX & STi |
Top |
|
Brand: GReddy
Desc: WRX/STi
Type: Uppipe
Part #: 11960000
Status: Ready to ship
Price: $114.00
Buy Now
|
The GReddy uppipe for the WRX connects the manifold to the turbo housing. Changing the factory unit out increases the spool of the turbo which results in smoother acceleration and a slight increase in mid to high RPM horsepower. GReddy uppipes are designed mount to factory style turbochargers and can be used with stock or aftermarket turbo manifolds.
|
|
| GT SPec Header for 02-07 Subaru WRX & STi |
Top |
|
Brand: GT Spec
Desc: WRX/STi Header
Type: Gen2
Status: Ready to ship
Price: $629.00
Also Fits: Legacy GT, Outback XT, Baja XT and Forester
|
The revolutionary GTSPEC GEN II velocity chamber design and the high quality finish are unchanged on the new generation as we strive to bring the best value to our customers. The flanges are completely redesigned: the finish is upgraded to stainless steel; and now come with a three bolts flange between header and uppipe to help prevent leaking between the up-pipe and the header. The EGT bung is revised as well. Detachable up-pipe is included. The up-pipe comes with a velocity chamber inside the pipe. This special feature is structure for increasing airflow velocity. This full stainless steel header and uppipe is covered under GT-SPEC's 2 years warranty.
The complete package includes header, up-pipe, block gasket x2, and upipe gasket x1, turbo to downpipe gasket and turbo to uppipe gasket. **Please use both the manifold to uppipe gasket that is provided in the kit.**
DYNO GRAPH: Click Here
|
|
| Agency Power Header |
 |
DZM Exhaust Package |
|
TurboXS Uppipe & Downpipe |
Brand: Agency Power
Desc: 02-05 WRX/STi
Type: Header
Price: $450.00
This header fits either the 2.0L or 2.5L engines. This header is made from 321 stainless steel and includes ˝ inch thick flanges. The headers have a special designed collector to give perfect flow into the uppipe providing faster turbo spool and increased horsepower.
** Show w/ Option AP Up Pipe
|
|
Brand: DZM
Desc: 02-05 WRX
Type: Exhaust Package
Status: Ready to ship
Price: $1425.00
Exhaust Package:
- 2" Stainless Up-pipe
- 3" Stainless Downpipe
- 3" Extension Pipes
- 3" Cat-back Exhaust
20-30 HP Gain!
|
|
Brand: TurboXS
Desc: WRX/STi
Type: Uppipe & Downpipe
Status: Ready to ship
Price: $495.00
The TXS uppipe replaces the factory uppipe connecting the exhaust header to the turbo. New design is all 304 stainless steel and utilizes a high pressure/high temperature flex joint for easy installation.
|
DYNO Tuning | Turbo Kits | Turbo Upgrades | Intercooler & Piping Upgrades | Blow-Off Valves & Wastgates
Exhausts & Downpipes | Engine Upgrades | Engine Management | STI Performance Packages
| GSC Camshafts Stage 1 & Stage 2 for 06-07 2.5L WRX & 04-07 STi |
Top |
|
Brand: GSC
Desc: 02-07 WRX & STi
Type: Camshafts
Status: Ready to Ship
Price: $1049.00
Buy Now
|
Stage 1 (266/266) Cams:
GSC Power-Division S1 camshafts for the USDM 04-07 STi. These will not drop any low end power, but actually cause faster spool of the turbo, creating more power and torque across the entire rpm range. Good for stock turbo or up to 500WHP(GT35R) upgrades. These cams require upgraded valve springs to keep everything safe at high rpm.
Stage 2 (272/272) Cams:
GSC Power-Division S2 camshafts for the USDM 04-07 STi. These cams are built to suite the high horsepower Subys. With a power range of 500WHP and up, you need some certain mods to utilize the true potential of the S2s. Built motor, with a built/ported head, and a good engine management system. Dual valve springs are recommended, but a upgraded single spring kit will do the job under 8000 rpm. **Due to the lob size, some head castings may need to be filled down slightly for clearance.
|
For Engines: 2.5L (EJ25)
Boost: Custom
Direct Bolt-On: Yes, Tuning Required
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| Cosworth Intake Manifold for 04-07 Subaru STI |
Top |
|
Brand: Cosworth
Desc: 04-07 STi
Type: Intake Manifold
Status: Ready to Ship
Price: $1095.00
Buy Now
|
Features:
- Substantially increased plenum volume
- Large, tapered runners with radius inlets
- Tuned plenum volume and runner length
- Over 10% increase in flow
- Integral vacuum manifold for connections
- Compatible with most aftermarket FMIC kits
- Works with standard or forward mount electronic throttle body
|
For Engines: 2.5L (EJ25)
Boost: Custom
HP: N/A
Direct Bolt-On: Yes
Warranty: N/A
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
|
The Cosworth Subaru High Volume Inlet Manifold is cast from aluminum featuring large tapered runners with radiused inlets for improved air flow. Plenum volume has been substantially increased and tuned for power. Engineered for easy installation and is the key to making big power. The Cosworth EJ257 plenum is designed for use with the 2004-2009 STI engines equipped with electronic throttle control. The plenum is not designed for use with any cable-actuated throttle body EJ20/25 applications. This plenum is designed to replace the factory Subaru plenum in vehicles equipped with an aftermarket front-mounted intercooler (FMIC) kit. Throttle body position remains stock, ensuring fitment with any brand FMIC kit designed for the stock throttle body and intake manifold.
|
| TurboXS Fuel Rail |
|
TurboXS UTEC |
|
Agency Power 816cc Injectors |
Brand: TurboXS
Desc: 02+ WRX Fuel Rails
Price: $350.00
TurboXS is proud to announce the immediate availability of our new bolt-on Fuel Rail Kit for non-AVCS (US MY01-05) Subaru WRXs.
TurboXS WRX Fuel Rail Kit:
- Aluminum Rails
- Aluminum Distribution Block
- Aluminum FPR Mount
- Suits factory FPR
- Suits Aftermarket FPR
- Stainless-steel braided hose
- All necessary mounting hardware
|
|
Brand: TurboXS
Desc: 02-05 WRX UTEC
Price: $845.00
The TurboXS UTEC enables complete programmable control over ignition timing, fuel, and boost, while allowing the factory ECU to maintain control over tedious and mundane functions that make the car drivable on a daily basis. Functions like cold start, hot start, intake temperature compensation, AC compensation and closed loop fuel control signals are all managed by the factory ECU reducing your tuning time significantly while enhancing daily drivability.
|
|
Brand: Agency Power
Desc: 02-05 STi 816cc Injectors
Price: $540.00
The Agency Power STI Injectors flow 816cc. These injectors are designed for cars with large turbo kits making 400+ horsepower. We have these injectors available as brand new sets of 4. You can also send your original equipment injectors to us at Agency Power for modification for a small fee. Mail-in injector modification receives FREE overnight return shipping. Modification turnaround takes up to 24 hours from the receipt of the injectors.
** Hi-Flow Fuel Pump Reccomended
|
| Deatschwerks 1000cc Injectors |
|
Deatschwerks 850cc Injectors |
|
Deatschwerks 650/750cc Injectors |
Brand: Deatschwerks
Desc: 07+ STi 1000cc Injectors
Price: $549.00
These Deatschwerks STI Injectors flow 1000cc. Finally an injector with enough flow for your High HP needs. If your current injectors are maxed, these will make a perfect upgrade. Deatschwerks injectors are tested individually to assure you that you get properly working injectors. They set high standards for their products. This in turns allows you to have a reliable high horse power setup.
** Hi-Flow Fuel Pump Reccomended
|
|
Brand: Deatschwerks
Desc: STi 850cc Injectors
Price 04-06: $599.00
Price 07+: $549.00
These Deatschwerks STI Injectors flow 850cc. They are capable of supports 400+ horsepower. These are a great upgrade for typical upgraded turbo setups. Deatschwerks injectors are tested individually to assure you that you get properly working injectors. They set high standards for their products. This in turns allows you to have a reliable high horse power setup.
** Hi-Flow Fuel Pump Reccomended
|
|
Brand: Deatschwerks
Price 04-06 550cc: $359.00
Price 04-06 740cc: $499.00
Price 07+ 650cc: $369.00
Price 07+ 750cc: $399.00
Deatschwerks STI Injectors are a great upgrade from the stock injectors. When adding more power you will need more fuel. Do not over work your stock injectors. The 650cc / 750cc injectors are a good starting point for a turbo upgrade. Deatschwerks injectors are tested individually to assure you that you get properly working injectors. They set high standards for their products. This in turns allows you to have a reliable high horse power setup.
** Hi-Flow Fuel Pump Reccomended
|
DYNO Tuning | Turbo Kits | Turbo Upgrades | Intercooler & Piping Upgrades | Blow-Off Valves & Wastgates
Exhausts & Downpipes | Engine Upgrades | Engine Management | STI Performance Packages
| Cobb Tuning AccessPort for 02-07 Subaru WRX & 04-07 STi |
Top |
|
Brand: Cobb
Desc: WRX & STi
Type: AccessPort
Status: Ready to ship
Price: $595.00
Buy Now
|
Unlock power hidden within the ECU by replacing conservative factory settings with more aggressive calibrations. The result is impressive gains in torque and horsepower while maintaining a high degree of safety. The AccessPORT comes with pre-installed maps that are optimized for common performance modifications. Performance gains across the entire power band can be quickly realized in the short time it takes to flash the vehicle's ECU with the AccessPORT. No tools are required. No additional “piggy-back” hardware. No mailing the factory ECU across the country. No vehicle downtime. No waiting. Just plug the AccessPORT in, flash the ECU and enjoy the thrill of increased torque and horsepower!
|
For Engines: EJ20 EJ25
Boost: N/A
HP Gain: Unlimited
Direct Bolt-On: Yes
Warranty: 1 Year
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| AEM Plug & Play EMS for 04-06 Subaru STi |
Top |
|
Brand: AEM
Desc: 04-06 STi
Type: Plug n Play EMS
Status: Ready to ship
Price: $1638.00
Buy Now
|
WRX AEM EMS Plug n Play EMS:
- Electronic Throttle Control
- Controls Subaru AVCS
- MAF, MAP or TPS Tuning
- Built-In Boost Control
- Closed Loop Fuel & Ignition
- Individual Fuel Trims per Cyl
- AEM Pro Tuning Software
Legal in California for Racing Use Only.
|
For Engines: EJ25
Boost: N/A
HP Gain: Unlimited
Direct Bolt-On: Yes
Warranty: 1 Year
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
DYNO Tuning | Turbo Kits | Turbo Upgrades | Intercooler & Piping Upgrades | Blow-Off Valves & Wastgates
Exhausts & Downpipes | Engine Upgrades | Engine Management | STI Performance Packages
| Vivid Racing Stage 4 Power Kit for 04-07 Subaru STI |
Top |
|
Brand: Vivid Racing
Desc: 04-07 STI
Type: Stage 4 Kit
Status: Ready to Ship
Price: $3059.00
Buy Now
|
Stage 4 Kit Includes:
- Garrett GT35R Ball Bearing Turbo
- Tial 38mm Wastegate
- 3inch Catless Downpipe
- Rotated Mount Catless Uppipe
- Wastegate Dump Tube
- Silicone Couplers
- Oil and Water Lines and Fittings
- Necessary Gaskets
- K&N Filter and Air Intake Tube
- Blow Through MAF Tube
Vivid Racing's Stage 4 kit is for the STI owner that wants beat up the Porsche's, GTR's, and other strong tuner vehicles on and off the track. The Stage 4 features 500 horsepower on pump gas to the crank giving you more room to break spirits on race gas. The stock 2.5L motor handles up to 23lbs of boost with no issues and can put out some strong torque and horsepower. Completely designed and engineered by Vivid Racing inconjunction with Agency Power products, the Stage 4 kit features bolt on products that are reliable, proven, and stylish.
|
For Engines: 2.5L (EJ257)
Boost: Custom
HP: 500hp
Direct Bolt-On: Yes
Warranty: N/A
Additional Options (with purchase of Kit:
- Agency Power Exhaust System: $850.00
- Agency Power Fuel Rails: $350.00
- Agency Power Header w/Uppipe: $670.00
- Clutch Masters Stage 3 Clutch Kit: $695.00
- Denso Iridium Spark Plugs: $48.00
- VR ECU Flash Tuning: $500.00
- Walbro 255l/hr Fuel Pump: $80.00
- Greddy Profec B Boost Controller: $380.00
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
|
The basis for our Stage 4 kit is the Garrett GT35R turbo kit by Agency Power. To obtain this power, you will need corresponding modifications as we have listed in the below options. The most important part of this kit is fueling and ECU tuning which Vivid Racing has accomplished with dyno testing using our Mustang AWD dynamometer. Our test car made 396 awhp on 91 pump octane. With a drivetrain loss of 25% for the Mustang dyno, this is 500HP to the crank. Expect higher numbers on 93octane and race gas. In combination with a turboback exhaust, intercooler kit, fuel system, and other bits and pieces, this Stage 4 kit will rocket you past the competition.
|
|
Universal Kits
