|
| SUMMER SIZZLE SALE - $100 OFF Any Kit | PRICE MATCH GUARANTEE | WE SHIP INTERNATIONAL | MILITARY DISCOUNTS! |
|
| Click Your Year: 03-06 G35 VQ35DE | 07-08 G35 VQ35HR |
| 03 + Infiniti G35 Single Turbo & Twin Turbo Kits: |
|

Brand: GTM
Desc: 03+ Infiniti G35
Type: Twin Turbo
Status: Ready to Ship
Price: $6795.00
Models: 6MT, 5AT
Buy Now
|
GTM Twin G35 Turbo Kit Includes:
- (2) Garrett GT28RS Twin Ball Bearing Turbos
- Cast Ductile Iron Exhaust Manifolds
- Pre-Bent Stainless Steel Heat Shields
- Exhaust Manifold Install Hardware Kit
- 4-Ply High Resist Nomex Silicon Couplers
- Stainless Steel T-Bolt Clamps
- 3.5" x 13" x 24" Bar & Plate Intercooler (1000hp)
- GTM Steering Coupler
- Polished Stainless Steel & Tig Welded Piping
- GTM Custom Mapped Plug-n Play Tuning
- (6) Denso 600cc Injectors
- Walbro 255lph Fuel Pump
- Pre-made Steel Braided Oil Lines
- Pre-made Steel Braided Water Lines
- Cold Air Intake System (w/ K&N Filters)
- TiAL 50mm Blow-off Valve
- HKS Internal Wastegate Actuators
- All Necessary Hardware
- Step-by-Step Installation Instructions
|
|
For Engines: VQ35DE (V6)
Boost: 6 PSI
HP Gain: 120+ WHP
Turbo Efficiency:
Stage 1 - 500hp
Stage 2 - 700hp
Stage 3 - 900hp
Stage 4 - 1000hp
Direct Bolt-On: Yes
Warranty: 1 Year
Ball Bearing Upgrade: $1300 FREE
3" Downpipes: $1135
Test Pipes: $272
Additional Performance Parts (Click Here)
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|

Brand: APS
Desc: 03-06 Infiniti G35
Type: Twin Turbo
Status: Ready to Ship
Price: $6895.00
Models: 6MT, 5AT & Rev Up
Buy Now
|
APS Twin G35 Turbo Kits Include:
- (2) APS T28 Journal Bearing Turbos
- APS Bar & Plate Front Mount Intercooler
- Stainless Steel Intercooler Piping
- High Flow APS Cast Manifolds
- Cast Ni Resist High Flow Turbine Outlets
- Cast Allow High Capacity Oil Pan
- (6) 550cc Drop In Injectors
- Injector Plug-n-Play Harness
- APS 4.0 Bar Fuel Pressure Regulator
- High Flow Drop In-Tank Fuel Pump
- APS Custom Mapped Plug-n-Play ECU
- APS High Volume Twin Vent BOV
- Twin APS Cold Air Intake Kit
- Install Instructions & Wiring Diagrams
- All Necessary Hardware & Fittings
|
|
For Engines: VQ35DE (V6) *Incl. REV UP*
Boost: 8 PSI (safely on stock engine)
HP Gain: 120+ WHP
Turbo Efficiency: 700hp
Direct Bolt-On: Yes
Warranty: 1 Year
Ball Bearing Upgrade: N/A
Additional Performance Parts (Click Here)
Questions & Information:

- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|

Brand: APS
Desc: 03-06 Infiniti G35
Type: Extreme Twin Turbo
Status: Ready to Ship
Price: $8895.00
Models: 6MT, 5AT & Rev Up
Buy Now
|
APS Extreme Twin Turbo Kits Include:
- (2) Huge Garrett Twin Ball Bearing Turbos
- Massive 5" Thick Front Mount Intercooler
- Stainless Steel Intercooler Piping
- (2) High Flow APS Cast Manifolds
- (2) High Flow Wastegates
- (2) Massive 3.5" Downpipes
- Cast Allow High Capacity Oil Pan
- (6) 880cc Drop In Injectors
- (2) APS Fuel Rails
- Complete Fuel Return System
- (2) APS 4.0 Bar Fuel Pressure Regulator
- Twin In-Tank High Flow Fuel Pumps
- APS High Volume Twin Vent BOV
- Twin APS Cold Air Intake Kit
- Install Instructions & Wiring Diagrams
- All Necessary Hardware & Fittings
Without doubt, everything about the APS Extreme Twin Turbo System says BIG! Big turbochargers, big intercooling, big fuel system, big down pipes - Big Power - over 50 lb/min mass air flow from each turbocharger.
This kit is no joke, this is for use in 800 WHP and up applications!
|
|
For Engines: VQ35DE (V6) *Incl. REV UP*
Boost: Custom
HP Gain: 500+ WHP
Turbo Efficiency: 1000hp
Direct Bolt-On: Professional Tuning Suggested
Warranty: 1 Year
Ball Bearing Upgrade: $650 FREE
Additional Performance Parts (Click Here)
Questions & Information:

- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|

Brand: SFR
Desc: 03-07 Infiniti G35
Type: Single Turbo
Status: Ready to Ship
Price: $6395.00 $6295.00
Models: 6MT, 5AT & Rev Up
Buy Now
|
SFR Single G35 Turbo Kits Include:
- T4 67 Turbonetics Turbos
- 304SS Cross Over Piping
- 304SS Uppipe
- 304SS Stainless Downpipe
- Synapse Synchronic 40mm Wastegates
- Synapse Synchronic BOV
- Spearco Front Mount Intercooler
- Intercooler Piping
- AEM FIC (Fuel Injector Controller)
- (6) 550cc Drop In Injectors
- Walbro In-Tank High Flow Fuel Pump
- 3" Intake Pipe
- K&N Air Filters
- All Oil Lines & Fittings
- All Couplers & Clamps
- Install Instructions & Wiring Diagrams
- All Necessary Hardware & Fittings
412 WHP, stock motor @ 6 PSI
|
|
For Engines: VQ35DE (V6) *Incl. REV UP*
Boost: 6 PSI
HP Gain: 200+ WHP
Turbo Efficiency: 700hp
Direct Bolt-On: Yes
Warranty: 1 Year
Ball Bearing Upgrade: $495
Additional Performance Parts (Click Here)
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|

Brand: SFR
Desc: 03-07 Infiniti G35
Type: Twin Turbo
Status: Ready to Ship
Price: $7495.00
Models: 6MT, 5AT & Rev Up
Buy Now
|
SFR Twin G35 Turbo Kits Include:
- (2) T3/T4 60-1 Hi-Fi Turbonetics Turbos
- (2) 304SS Equal Length Tubular Manifolds
- (2) 304SS Stainless Downpipes
- (2) Tial or Turbonetics Wastegates
- HKS Super SQV BOV
- Oil Scavenge Pump & Install Kit
- Aluminum Oil Sump
- Spearco Front Mount Intercooler
- Aluminum Intercooler Piping
- Pre Tuned Split Second FTC ECU
- (6) 440cc Drop In Injectors
- Walbro In-Tank High Flow Fuel Pump
- Aluminum Intake Piping
- Twin K&N Air Filters
- Install Instructions & Wiring Diagrams
- All Necessary Hardware & Fittings
439 WHP, 449 ft/lbs, stock motor @ 8.5 PSI
Big power and a flat torque curve is what you get when you purchase this kit. Gains of 252 peak horsepower at the wheels and the peak torque increased by 209 ft/lbs on a completely stock motor! This kit has the ability to make in excess of 1000WHP with the right supporting mods (see below).
|
|
For Engines: VQ35DE (V6) *Incl. REV UP*
Boost: 8.5 PSI (
HP Gain: 250+ WHP
Turbo Efficiency: 1000hp
Direct Bolt-On: Professional Installation Suggested
Warranty: 1 Year
Ball Bearing Upgrade: $995
Turbonetics GT-K Upgrade: $1495
Garrett GT30 or GT35R $995
Additional Performance Parts (Click Here)
Questions & Information:

- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|

Brand: GReddy
Desc: 03-04 G35 Twin
Type: Twin
Status: Ready to ship
Price: $8435.00 $8097.80
w/ Intercooler
Buy Now
|
GReddy G35 Twin Turbo Kits Include:
- (2) Mitsu TDO5H-18G Turbos
- (2) Cast-Iron Manifolds
- (2) Ext. Type T Wastegates
- (1) Pre-Programmed E-manage
- (6) 440cc Injectors
- (1) GReddy Front Mount Intercooler
- (1) Intercooler Piping Kit
- (2) Airinx AY-SB
- Pre-Welded Oil Return Oil Pans
- All Necessary Piping
- All Necessary Hardware
|
|
For Engines: VQ35DE (V6)
Boost: 5.6 PSI
HP Gain: 100 + WHP (safely on stock engine)
Turbo Efficiency: 700hp
Direct Bolt-On: Yes
Ball Bearing Upgrade: N/A
Exhaust Upgrade: $995 EVO2 Dual
Clutch Upgrade: ACT Street $575
Flywheel Upgrade: Fidanza Aluminum $575
Short Shifter: B & M $172
Additional Performance Parts (Click Here)
Questions & Information:

- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
|
|
G35 Turbo Accessories: |
|

Brand: AAM
Desc: 350Z/G35 Fuel Return Kit
Price: $999.00
The AAM Return Fuel Rail System for the Nissan 350Z and Infiniti G35 is a direct bolt-on kit that converts the current factory “return less” fuel system to a full return fuel system.
|

Brand: AAM
Desc: 350Z/G35 Oil Pan Spacer
Price: $149.00
For added oil capacity and cooling potential the AAM Spec Oil Pan Spacer is a great upgrade. Not only does it add an engine saving quart of oil to capacity. It makes installing the oil drain lines of any turbo kit a cinch.
Oil Line Kit = $89.00
|
|

Brand: AAM / Cipher
Desc: UpREV OBDII Controller
Price: $400.00
The ultimate in Digital Data logging, Diagnostic, and Monitoring systems for your Nissan 350Z and Infiniti G35. If you are a performance enthusiast you need the Cipher. There is no other product on the market that has the features or functionality of Cipher. Tuning your 350Z and G35 to perform at its highest levels of optimization, reliability, and performance requires the ability to know what is going with your car.
|
|

Brand: SFR
Desc: 3.5L - 3.7L Built VQ Block
Price: $4495.00
|
Short Block Includes
- Balanced & Blueprinted
- Bored & Honed
- Balanced Crank
- Arias Pistons
- Pauter H-Beam Rods
- Stock Nissan Bearings
- Engine Machining & Assembly
- Choice: 8.6, 9.2, 10.5 or 11.5 CR
|
|
Short Block Add-Ons
- Darton Sleeved Block - $2595.00
- Knife Edge, Perp Drilled Crank - $845.00
- Cryo Treat Engine Assembly - $395.00
- Thermal Coating on Pistons - $345.00
- ARP (Main and Head Studs) - $495.00
- Core charge - $995.00 (if not supplied)
|
|
Every block has its deck surfaced to insure straightness. Each block is bored and honed with a deck plate to exacting specifications to provide the correct piston to cylinder wall clearance. Then all of the pistons rings are file fit to each cylinder to provide the correct ring end gaps which allows you to make more power with less leak down. After this the main and rod bearing clearances are checked with a bore gauge and micrometer (plastigauge is very inaccurate which is why it is not used) to get the appropriate clearances which will ultimately lead to prolonged engine life. The motor is finally assembled and torqued down to factory specifications. The crankshaft is then checked for end play and rod side clearance to make sure they are in spec. A stock sleeved block is good to about 700 horsepower, whereas Darton sleeved block is good for over 1000 horsepower.
|
|

Brand: 350Z/G35 Headwork
Desc: Stage I Head
Price: $1095.00
Stage 1 heads feature extensive port work on the intake and exhaust. Utilize stock valves and springs which are inspected and tested to meet factory specifications. The heads get surfaced to insure straightness. New guides and seals are installed and the valves and seats get a 3 angle grind and lapped before final assembly.
|

Brand: 350Z/G35 Headwork
Desc: Stage 2 Head
Price: $1695.00
Stage 2 heads feature all of the work of the stage 1 heads except a Ferrea valve spring and titanium retainer package is used to replace the stock springs and retainers. This allows for higher rpms without the risk of valve float at high rpms. These heads are capable of 7500 rpms.
|
|

Brand: 350Z/G35 Headwork
Desc: Stage 3 Head
Price: $3995.00
Stage 3 heads are the best flowing cylinder heads you can buy for your Z or G. They feature 1mm oversize stainless Ferrea valves with the Ferrea race spring and titanium retainer package. These cylinder heads receive the same high quality port work as the stage 2 heads along with additional work to the combustion chambers. A a five angle grind on the seats which is done on a Serdi head machine to accommodate the 1mm oversize Ferrea valves. These heads are capable of 8000 rpms without the risk of valve float.
|
|

Brand: Custom
Desc: 350Z/G35 True Dual 3" HKS Carbon Ti!
Price: $1649.00
True Dual 3" Stainless piping, all mandrel bent and exiting out of Twin HKS Carbon Ti Mufflers. Guaranteed to outflow all others!!
|

Brand: Turbo XS
Desc: 350Z/G35 UTEC
Price: $845.00
The UTEC gives you the ability to let the factory ECU drive the car under normal cruise conditions then take over when you are ready for the power in a flawless manor. The UTEC allows you to maintain OBDII compliancy while remaining unnoticed to the OBD Scan process most states are adopting these days.
|
|

Brand: Tein
Desc: 350Z/G35 Flex Coilovers
Price: $1795.00
This is the ultimate street set-up. These shocks are fully height adjustable and 16 way Compression/Rebound adjustable. With a dual spring setup they maintain a smooth street ride but with a twist of the Compression/Rebound adjustment on the shock they can turn into a stiff track setup.
|

Brand: MotorDyne
Desc: 350Z/G35 Plenum Spacers
Basic 5/16": $265.00
Basic 1/2": $295.00
ISO Thermal 5/16": $295.00
ISO Thermal 1/2": $325.00
Copper ISO 5/16": $345.00
Copper ISO 1/2": $375.00
10-18 Additional HP!
|

Brand: JWT
Desc: 350Z/G35 Clutch Kit
Price: $449.00
Jim Technology Heavy Duty Clutch for the 350Z/ G35 is now available and in-stock. This performance grade clutch has 1200kg of clamping force (higher clamping force then the stock 300Z TT clutch). This clutch is rated to hold over 500ft. lbs. of torque.
Flywheel Also Available = $395.00
|
|

Brand: Rotora
Desc: 350Z/G35 Rotora BBK
Price: $2395.00
RBK015.02 6-PISTON 355X32 2-PIECE
Rotora Big Brake Kit Upgrades are made with the performance enthusiast in mind. Fully cast and CNC machined for the highest quality; the 6-Piston caliper brake kit system improves pedal feel by increasing clamping force while maintaining the stock master cylinder, ensuring stock brake balance.
|
|
07 - 08 Infiniti G35 Twin Turbo Kits (Dual Throttle Body): |
|

Brand: GTM
Desc: 07-08 Infiniti G35
Type: Twin Turbo
Status: Ready to Ship
Price: $7495.00
Models: 6MT, 5AT
Buy Now
|
G35 Twin Turbo Kits Include:
- (2) Garrett GT28RS Twin Ball Bearing Turbos
- Cast Ductile Iron Exhaust Manifolds
- Pre-Bent Stainless Steel Heat Shields
- Exhaust Manifold Install Hardware Kit
- 4-Ply High Resist Nomex Silicon Couplers
- Stainless Steel T-Bolt Clamps
- 3.5" x 13" x 24" Bar & Plate Intercooler (1000hp)
- GTM Steering Coupler
- Polished Stainless Steel & Tig Welded Piping
- GTM Custom Mapped Plug-n Play Tuning
- (6) Denso 600cc Injectors
- Walbro 255lph Fuel Pump
- Pre-made Steel Braided Oil Lines
- Pre-made Steel Braided Water Lines
- Cold Air Intake System (w/ K&N Filters)
- TiAL 50mm Blow-off Valve
- HKS Internal Wastegate Actuators
- All Necessary Hardware
- Step-by-Step Installation Instructions
|
|
For Engines: VQ35HR (V6)
Boost: 6 PSI
HP Gain: 120+ WHP
Turbo Efficiency:
Stage 1 - 500hp
Stage 2 - 700hp
Stage 3 - 900hp
Stage 4 - 1000hp
Direct Bolt-On: Yes
Warranty: 1 Year
Ball Bearing Upgrade: $1300 FREE
3" Downpipes: $1135
Test Pipes: $272
Additional Performance Parts (Click Here)
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
|
|
Contact Turbo-Kits.com NOW (only for questions not answered in our FAQs section): |
|
|
|